TEL +44 (0) 1752 334933 Tackle for the Real World 
If you like this page please share it with your friends by clicking the 'Share' button below 
SFT Neoprene Waders. 
2015 sees a new range of Neoprene waders using a revolutionary new manufacturing technique! 
Snowbee have been making Neoprene waders for over 25 years and in that time we’ve learnt never to compromise quality because of price. To stay dry - insist on Snowbee 100% CR Neoprene. 
Neoprene waders have always been prone to develop seam leaks after a period of time. This is owing to two factors – the grade of Neoprene used and the seam manufacturing technique. 
Many manufacturers use cheaper grades of Neoprene such as SBR (Styrene Butyl Rubber), a very cheap grade of Neoprene that not only starts life less elastic then premium grades, but quickly loses its elasticity, in as little as 3-6 months. This then transfers all the stresses and strains onto the seams, rather than being absorbed by the elasticity of the material. Traditionally, Neoprene waders are manufactured by buttgluing the seams together, then ‘blind stitching’ the outside for strength, and heat taping the inside. When you think about it, you have a 4mm waterproof layer, which you have then punctured half way through, by the ‘blind-stitching’ technique, which now only leaves you 2mm of material between you and the water! Not the greatest of ideas! 
SFT Neoprene Detail
Our new 2015 Neoprene range not only uses 100% CR (Chloroprene Rubber) Neoprene, which is the best quality available, being ultra-soft and highly elastic, but also uses a revolutionary new manufacturing technique. 
Employing the same SFT (Seamless Fusion Technology) we have used on our popular SFT Neoprene Gloves, the seams are first fused together, with state-of-the-art adhesives and then heat taped inside and out. Not only does this give a ‘flat-profile’ seam less likely to chafe, but you retain the full 4mm thickness of Neoprene for complete water resistance for the life of the waders. The innovation doesn’t stop there. The more traditional inner nylon lining has been replaced with a fine, laminated micro-fleece offering additional warmth and comfort, even in the coldest conditions. Another new innovation from Snowbee! 
SFT Neoprene Detail
Snowbee have been making Neoprene waders for over 25 years and in that time we’ve learnt never to compromise quality because of price. To stay dry, insist on Snowbee 100% SCR Neoprene. 
Rubber Boots 
Our new 2015 Bootfoot models are fitted with a quality hand-laminated Rubber Boot, fitted with a steel sole shank built into the mid-sole. This reduces torsion and protects the foot from sharp stones or piercing injury. Lined with 4mm Neoprene throughout for total warmth in the coldest conditions. 
The top of the boot is fitted with an innovative ‘Roll-up’ rubber sealing strip to ensure the boot join remains 100% waterproof. 
4mm SFT Neoprene Chest Waders 
4mm double lined, 100% CR Neoprene 
Micro-fleece inner lining, for additional warmth 
High back style with integral neoprene braces for additional warmth across the shoulders and top of back 
Elasticated front adjusters with quick release plastic buckles. 
Front pouch pocket, plus additional handwarmer pocket behind 
Unique ‘screen printed’ PVC kneepads provide total protection to the knee area without any stitching penetrating the Neoprene. 
Hand laminated Rubber Boots, with steel sole-shank built into midsole reduces torsion and protects from piercing injury 
4mm Neoprene boot lining for total warmth 
Available in 2 sole options: Cleated and Combination Felt-Sole Available in Standard and Fuller Body sizes 
Colour – Olive Green 
12086 4mm Neoprene Bootfoot Chest Waders 
Our top-selling Bootfoot model is available in either a ‘Commando’ pattern deep tread Cleated Sole or our Combi Felt-Sole. 
Sizes: 6 to 13. 
12086 FB Fuller Body (FB) sizes 
The same features as our standard Neoprene waders butwith body sizes approximately 15% larger. 
Sizes: 8 –12 only. 
12086JNR .02 Junior/Ladies sizes- See size chart> 
The same features as our standard bootfoot range, but in a smaller size designed specifically for juniors and ladies. Fitted with our Combi Felt-Sole for all-round grip. 
Size: 5 (38). 
12086-01 SFT  Neoprene Bootfoot Wader
12087 4mm Cleated Sole Neoprene Thigh Waders 
Ideal reservoir fishing or where extra warmth is required. The 4mm Neoprene plus micro-fleece lining provides total insulation when standing in cold water for long periods. Adjustable belt straps with quick release buckles. 
Sizes: 6 to 13 
12087 4mm Cleated Sole Neoprene Thigh Waders
SFT Neoprene knee detail 
SFT Neoprene Sole Option & detail 
12085 4mm Neoprene Stockingfoot Chest Waders 
The same features as the Bootfoot models but in a stocking foot style. 
Unique 3-panel design Neoprene sock – no seams run under the foot 
Shaped foot design to avoid slack material inside your wading boots 
Hypalon sole panel prevents compression at the heel area 
Non-slip panel at back of heel to prevent sock slipping 
Integral Neoprene Gravel Guard with front lacing hook. 
Sizes: S (5-6), M (7-8), L (9-10), XL (11-12), XXL (13-14) 
12085 4mm Neoprene Stockingfoot Chest Waders
12085 4mm Neoprene Stockingfoot Chest Waders stockingfoot detail and pocket detail 
Rockhopper Wading Boots 
With the huge increase in Japanese style “Rock Fishing” for Bassand Wrasse, these new lightweight waist waders are the type & style used by Japanese “Suzuki” fishermen. 
13167-05 Rockhopper Neoprene Wading Boots 
Our Rockhopper Wading Boots originated in Japan for rock fishing, where good grip is essential. Fitted with our unique Spike Sole, these boots offer the ultimate grip on any surface – particularly weed covered rocks, where other soles fail. The flexible, hardened steel spikes cut down through the weed, to grip the rock below and will even grip in icy conditions. 
Neoprene uppers with a side zip closure they are equally suitable for ‘wet wading’ in the summer months or overseas. 
Please Note: For use over Stockingfoot waders, we recommend you go up one size on your normal shoe size). 
Colour: Black/Grey 
Available in sizes: S,M,L,XL,XXL 
19025 Rockhopper Wader-Grips 
These ingenious Wader-Grips, can be used on any waders or wading boots, to give additional grip on slippery surfaces, whether algae covered rocks, dam walls or even ice!  
Simply fasten the Wader-Grips to your boots, for instant, extra grip. The thermoplastic rubber material is highly elastic, so they will stretch to fit a wide range of boot sizes.  
Ideal for anyone who has to walk long distances to their fishing, so wants cleated soles, but then requires extra grip in the river or reservoir bank, or rocky shoreline. Each Wader-Grip is fitted with 10 hardened carbon steel studs, for extra grip. 
Sizes: L – for all waders or boots up to size 11. XL – for all Wading Boots, or larger waders from sizes 11-14 
19025 Rockhopper Wader-Grips
13081-05 ‘Rockhopper’ Boots 
A hand laminated rubber boot, bonded to a Neoprene lining and upper, for the ultimate in warmth and comfort. Add our famous ‘Spike- Sole’ and you have the ultimate boot for any occasion where deep wading is not required. Our Spike Sole consists of hardened steel spikes, set between deep rubber ‘cleats’ so they are able to ‘flex’, which is what gives them their outstanding grip. We haven’t yet found a surface this sole will not grip on – even ice! 
Colour: Black with grey trim & red lining 
Sizes: 6-11 
13081-05 ‘Rockhopper’ Boots
Snowbee 600D Wadermaster Waders  
The waders of choice for anyone working in waders all day long, due to their exceptional strength, wear and tear resistance and comfort. 
11281-01 600D Wadermaster Waders - See Size Chart>  
Our popular Wadermaster has been further improved by adopting the same pocket style, as used on our Prestige ST Breathable Waders. The tough 420D Ballistic Nylon material, has an additional checked rip-stop pattern for even greater strength and durability. They’re not breathable and they’re not lightweight. What they are is incredibly tough, durable and hardwearing. They deflect thorns and gorse like no other material and if you want a pair of waders that is going to last… this is it. 
420D Ballistic Nylon material with a PVC backing to ensure it stays waterproof 
Unique acrylic felt lining to boots for warmth and comfort 
Interior lined with heavy duty nylon mesh to avoid condensation 
All seams double stitched and heat taped on the inside 
Heavy duty, moulded PVC boots, heat welded to the upper to ensure they remain watertight 
Fully cleated sole for sure grip in all conditions and terrain. 
Fully adjustable elasticated braces 
Front welded patch pockets 
Additional internal mesh pocket 
Adjustable webbing waist belt 
Rear reflective strip for night-time safety 
Colour: Black  
Sizes: 6 to 13  
11281-01 Wademaster Waders
11282-01 Wadermaster Thigh Waders 
A thigh version of our popular Wadermaster made in the same tough, rip-stop material for hard wear in the most rugged conditions. 
Colour: Black  
Sizes: 6 to 13  
11282-01 wademaster Thigh Waders
150D Rip-Stop Nylon Waders  
For over 10 years our top selling wader has been the popular 210 denier Nylon model. On the ‘if it ain’t bust, don’t mend it’ principle we saw no reason to change this… until our material manufacturer developed this new material; a 150D Rip-stop Ballistic Nylon material which is light, flexible and super-tough. The checked Rip-Stop over-weave prevents tears, while the soft, flexible PVC lining ensures they stay 100% waterproof and provide all-day comfort.  
11251 150D Nylon Chest Waders - See Size Chart> 
Our new 150D Rip-stop Ballistic Nylon material is lighter, tougher, more durable and more flexible than the old PVC, so offers the wearer greater protection coupled with added wearer comfort. 
‘American Style’ full cut, with seams up the outside of the legs and a single front-to-back crotch seam to avoid chaffing. Adjustable webbing braces with elasticated rear section and quick-release plastic buckles. Elasticated drawstring around chest with side adjuster straps for snug fit. Opposed buckles allow waders to be rolled down into a waist wader. Inside flap pocket. 
Tightly woven 150D Rip-stop Ballistic Nylon outer to resist thorns and abrasion 
Inner PVC coating ensures they remain 100% watertight 
Double-stitched seams heat sealed on the inside for added strength 
Quality two-tone PVC boot 
Two sole options: deep cleated or combination ‘Combi’ Felt- Sole. 
Sizes: 5–15 and 8FB–12FB in Cleated sole and 5-14 in Combi felt-sole. 
Colour: Stone 
11261 150D Nylon Thigh Waders 
Belt straps with adjustable buckles and elasticated section for comfort. 
Sizes: 5–15 and 8FB–12FB in Cleated sole and 5-14 in Combi felt-sole. 
Colour: Stone 
PVC Waders 
CLASSIC Hi-Elastic PVC Waders: 
A budget priced Wader, using a ‘Hi-elastic’ PVC Material, providing plenty of “give” for ease of mobility and wearer comfort. This Lightweight material although not as tough as the Nylon materials, still offers exceptional value for money. 
11061.01 Hi Elastic PVC Thigh Waders - See Size Chart> 
As with the chest wader range, plenty of give from the Hi-elastic material and cleated sole is ideal for shallow wading, launching boats or simply cleaning out the garden pond. 
Colour: Dark Green 
Sizes: 3 to 12  
11061.01 Hi Elastic PVC Thigh Waders
11071.1 Chest Wader - See Size Chart> 
Fitted with our cleated sole, PVC boots and nylon/elastic webbing braces and belt straps. The Hi-Elastic material has plenty of ‘give’ for comfort. 
Colour: Dark Green 
Sizes: 3 to 12 
11071.1 / 11061.1 Junior Sizes 
The Hi-Elastic PVC Junior range is available in both chest and thigh models. Now from UK size 3 (European size 35), introduced by popular demand, so we can now offer junior sizes in an affordable wader, which won’t break the bank when the kids grow out of them! 
11071.1 Chest Wader